Table of Contents
As paddleboarding becomes more widespread, more and more people are using electric air pumps as a means of inflating their paddleboards. But few people are discussing the effects of changes in altitude on electric SUP pumps. Understanding the impact of altitude on electric air pumps is of great significance to outdoor paddleboard enthusiasts, and today the GICLE AP-882H SUP and Tire Electric Air Pump will explain the impact of altitude on paddleboard inflation pumps so that paddleboard enthusiasts can ensure the smoothness of the inflation process as well as the use of the paddleboard’s safety and performance.
Effects of Altitude on Electric SUP Pump
Atmospheric pressure is significantly lower at higher altitudes than at lower altitudes. At relatively stable temperatures, the pressure decreases and the volume of gas increases accordingly. There are two effects on the inflation of electric inflation pumps, namely the slowing down of inflation speed and the difficulty in controlling the inflation pressure accurately.
1.Electric SUP Pump filling rate slows down
The working principle of electric inflatable pump is to inhale and compress the outside air into the paddleboard. At high altitudes, the amount of air drawn in by the pump decreases due to low outside air pressure. For example, near sea level, the pump may be able to draw in 1 liter of air at a time, but at an altitude of 3,000 meters, it may only be able to draw in 0.7 liters of air. This results in the inflation pump needing more duty cycles to achieve the air pressure required for the paddleboard, resulting in significantly longer inflation times.
Taking the Outdoor Master Shark II as an example, when inflating at high altitude, the speed of inflation is significantly reduced compared to low altitude. Whereas a standard paddleboard may be inflated in less than 10 minutes at low altitude, it may take up to 15 minutes or even longer at high altitude, and the Shark II’s continuous operating time is 30 minutes, and when it is longer than that it requires a long time to cool down to ensure that the paddleboard is properly inflated. The Shark II has a continuous working time of 30 minutes, and when it exceeds 30 minutes, it needs to be cooled down for a long period of time to ensure that the device will not burn out. The GICLE AP-882H SUP and Tire Electric air pump has more outstanding performance in this regard. The AP-882H can work continuously for 4 hours and adopts parallel dual-stage inflation technology to complete the inflation faster. It can be used at high altitude without worrying about under-inflation of the paddleboard.
2.Tends to overstuff the paddleboard
Currently on the market the vast majority of some of the electric inflatable pump at high altitude use, it is easy to appear pressure detection is not allowed, users need to adjust the inflatable pressure settings or reduce the inflatable time to ensure that the paddleboard to achieve the appropriate inflatable state.
If the electric paddleboard pump is not calibrated at high altitude, it is easy to over-inflate the paddleboard. This is because the electric paddleboard inflation pump is inflated according to low altitude standards. At low altitude, the atmospheric pressure is high, for example, 101.3kPa, we set to inflate to a gauge pressure of 10kPa, then the actual pressure in the paddleboard is 111.3kPa. But at high altitude, the atmospheric pressure is only 70kPa, but the pump can’t be calibrated actively, it will still inflate according to the 10kPa, so the actual pressure in the paddleboard becomes 80kPa. The appropriate pressure for high altitude is assumed to be 75kPa, so it will be over-inflated, which may break the paddleboard, which is not safe to use, and will also damage the service life of the paddleboard.
Of course, there are devices that can be adapted to high altitudes, such as the GICLE AP-882H SUP and Tire Electric air pump, which has an air pressure and altitude calibration function that allows the user to independently calibrate the ambient air pressure of the region, thus avoiding the lack of precision caused by the higher altitude.GICLE AP-882H SUP and Tire Electric air pump can be perfectly adapted to high altitudes. The GICLE AP-882H SUP and Tire Electric air pump is perfectly adapted to high altitude areas.
Returning from high elevation to low elevation impacts Electric SUP Pump
When taking an inflated paddleboard from a high altitude to a low altitude, the change in air pressure will affect the inflation again due to the increase in outside air pressure. Going from low altitude to high altitude will cause the board to over-inflate. Going from high altitude to low altitude is the opposite, causing the board to under-inflate. Underinflating a paddleboard can affect the paddleboarder’s experience.
Of course, the altitude compensation function of the GICLE AP-882H SUP and Tire Electric air pump can perfectly solve these problems. The GICLE AP-882H can intelligently adjust the pressure according to the current air pressure environment and the internal pressure of the paddleboard, whereas some ordinary air pumps may require the user to manually control the inflation process based on the experience and the actual measurement of the pressure value to avoid over-inflation. inflation process to avoid over-inflation leading to damage of the paddleboard.
Changes in altitude have a significant impact on the inflation of electric SUP pumps. At higher altitudes, inflation is slow and pressure control is difficult; when returning to a lower altitude from a higher altitude, it may be necessary to re-inflate the paddleboard and rationalize the operation of the air pump. Paddleboard enthusiasts who use electric air pumps at different altitudes need to fully understand these influencing factors, and reasonably adjust the inflation operation and the expectation of the air pressure of the paddleboard to ensure the normal use and safety of the paddleboard, so electric air pumps that can be calibrated according to the air pressure and altitude, like the GICLE AP-882H SUP and Tire Electric Air Pumps are ideal choices for those who wish to experience the fun of paddleboarding at different altitudes. The GICLE AP-882H SUP and Tire electric air pumps are ideal for users who want to experience the fun of paddleboarding at different altitudes.
